Warning
All work for this lab will be performed exclusively from the Linux Jumphost. No installation or interaction with your local system is required.
All pre-built environments implement the Lab Topology shown below. Please review the topology first, then find the section matching the lab environment you are using for connection instructions.
The network topology implemented for this lab is very simple. Since the focus of the lab is Control Plane programmability rather than Data Plane traffic flow we can keep the data plane fairly simple. The following components have been included in your lab environment:
The following table lists VLANS, IP Addresses and Credentials for all components:
Component | Management IP | VLAN/IP Address(es) | Credentials |
---|---|---|---|
Linux Jumphost | 10.1.1.20 | Internal: 10.1.10.20 External: 10.1.20.20 |
ubuntu/supernetops |
BIG-IP A | 10.1.1.10 | Internal: 10.1.10.10 Internal (Float): 10.1.10.13 External: 10.1.20.10 External (VIPs): 10.1.20.120-130 |
|
BIG-IP B | 10.1.1.11 | Internal: 10.1.10.11 Internal (Float): 10.1.10.13 External: 10.1.20.11 External (VIPs): 10.1.20.120-130 |
|
iWorkflow | 10.1.1.12 | N/A |
|
Linux Server | 10.1.1.15 | Internal: 10.1.10.100-103 | root/default |
In order to complete this class you will need to utilize a specific Lab Environment. You can consume this training in a couple of ways:
Select the Environment from the list below to get started: